Course Overview
The Level 2 Award in Oil & Gas Safety program introduces learners to the essential principles of health, safety, and environmental protection in oil and gas operations. It emphasizes compliance with industry standards, hazard identification, and emergency response procedures. Participants will gain the competence to work safely in oil and gas environments, understand key risks, and contribute to a culture of safety and sustainability.
Qualification Details
| Qualification Title | Level 2 Award in Oil & Gas Safety |
|---|---|
| Total Credits | 10 |
| Guided Learning Hours | 100 |
| Qualification Time | 100 |
To enrol on the Level 2 Award in Oil & Gas Safety, learners should normally meet the following recommended entry requirements:
Be 16 years of age or above at the time of registration.
Hold a basic secondary education qualification or equivalent. Equivalent international qualifications may also be accepted.
Learners without formal academic qualifications may be considered if they can demonstrate relevant knowledge, workplace experience, or prior learning in occupational health and safety, engineering, industrial operations, construction, maintenance, or the oil and gas sector.
Have a basic understanding or interest in workplace health and safety, industrial hazards, environmental protection, emergency procedures, and safe working practices.
Possess a sufficient standard of English language proficiency to understand safety instructions, interpret basic technical information, complete assessments, and communicate effectively in oil and gas working environments.
-
Introduction to Oil & Gas Safety Reviews the importance of safety in oil and gas operations and industry best practices.
-
Health, Safety, and Environmental (HSE) Regulations Explains international and national safety standards, including OSHA, ILO, and local frameworks.
-
Hazard Identification and Risk Assessment Covers common hazards in oil and gas operations and methods for assessing and mitigating risks.
-
Personal Protective Equipment (PPE) Reviews correct selection, use, and maintenance of PPE in oil and gas environments.
-
Fire Safety and Explosion Prevention Explains fire hazards, control measures, and emergency response protocols.
-
Safe Handling of Hazardous Substances Covers chemical safety, spill response, and safe storage practices.
-
Working at Heights and Confined Spaces Reviews safety procedures, permits, and monitoring requirements.
-
Emergency Response and Evacuation Procedures Explains drills, communication protocols, and coordination with emergency teams.
-
Environmental Protection in Oil & Gas Operations Focuses on pollution prevention, waste management, and sustainability practices.
-
Case Studies and Practical Applications Reviews real‑world incidents and lessons learned to reinforce safe practices.
-
Builds foundational competence in oil and gas safety practices
-
Enhances compliance with international and national HSE standards
-
Strengthens skills in hazard identification, PPE use, and emergency response
-
Provides tools for environmental protection and sustainability in oil and gas operations
-
Offers recognized certification to support career progression in oil and gas safety roles
-
Entry‑level employees in oil and gas operations
-
Contractors and support staff working in oil and gas facilities
-
Students and early‑career professionals in energy and safety studies
-
HSE assistants preparing for advanced qualifications
-
Community workers and safety advocates in oil and gas regions
-
Assessment Type: Written exam + practical simulation
-
Format: MCQs, short answers, and a hands‑on safety drill
-
Total Questions: 45 theory + 1 practical simulation
-
Passing Score: 70%
-
Duration: 1.5 hours (written) + 1 day (practical)
-
Certification: Level 2 Award in Oil & Gas Safety
To deliver this Qualification, HiQual UK Approved ATPs must demonstrate the capability to deliver, assess, and internally quality assure qualifications in line with recognised regulatory principles and the expectations of the Regulated Qualifications Framework (RQF).
Approved centres must operate effective systems to ensure the validity, reliability, fairness, consistency, and security of assessment.
1. Centre Recognition and Legal Compliance
Centres must be formally recognised by HiQual UK prior to the delivery or assessment of any
qualification. To maintain recognition, centres must:
Be a legally constituted organisation operating in compliance with applicable legislation and
regulatory
requirements.
Demonstrate effective governance, management oversight, and clear lines of accountability.
Comply with all HiQual UK policies, procedures, and conditions of centre recognition.
Notify HiQual UK promptly of any material changes that may affect delivery, assessment, or internal
quality assurance arrangements.
2. Resources, Facilities, and Learning Environment
Centres must ensure that sufficient and appropriate resources are in place to support learning and
assessment. This includes:
Learning environments appropriate to the mode of delivery, including classrooms and, where
applicable,
specialist or practical facilities.
Access to learning and assessment resources that enable learners to meet qualification outcomes.
Secure systems for managing learner data, assessment records, and certification claims.
Arrangements that support equality of access and reasonable adjustments for learners where required.
3. Staff Competence and Occupational Expertise
Centres must ensure that all staff involved in delivery, assessment, and internal quality assurance
are
competent and suitably qualified. Centres must:
Appoint tutors with appropriate subject knowledge, teaching competence, and relevant occupational or
professional experience.
Ensure assessors are trained and competent in applying HiQual UK assessment requirements and
standards.
Appoint a qualified Internal Quality Assurer (IQA) responsible for monitoring assessment practice
and
decisions.
Maintain records of staff qualifications, experience, training, and continuing professional
development
(CPD).
4. Assessment Practice and Internal Quality Assurance (IQA)
Centres must operate robust internal quality assurance systems to ensure assessment integrity.
Centres
must:
Ensure assessment is valid, fit for purpose, and conducted in line with HiQual UK requirements.
Implement effective IQA procedures to monitor assessor performance and confirm the consistency of
assessment decisions.
Maintain accurate, complete, and auditable records of learner registration, assessment evidence, and
outcomes.
Carry out regular internal reviews and standardisation activities to support continuous improvement.
5. Integrity, Risk Management, and Malpractice
Centres must take appropriate measures to protect the integrity of assessment. Centres must:
Maintain policies and procedures for the prevention, identification, and management of malpractice
and
maladministration.
Ensure secure handling, storage, and retention of assessment materials and learner evidence.
Report any suspected or confirmed malpractice to HiQual UK in accordance with published procedures.
6. Health, Safety, Safeguarding, and Learner Protection
Centres must provide a safe, inclusive, and supportive learning environment. Centres must:
Comply with applicable health and safety and safeguarding legislation.
Conduct risk assessments for learning activities, particularly where practical or technical work is
involved.
Maintain procedures to safeguard learner welfare and wellbeing.
7. Learner Information, Support, and Fair Treatment
Centres must ensure learners are informed, supported, and treated fairly. Centres must:
Provide clear and accurate information on programme requirements, assessment methods, and
certification.
Ensure learners receive timely and constructive feedback on assessment outcomes.
Operate transparent complaints and appeals procedures aligned with HiQual UK requirements.
Manage learner information securely in compliance with data protection legislation.
Successful learners who achieve the Level 2 Award in Oil & Gas Safety may progress to:
HiQual UK Level 3 Certificate in Oil & Gas Operational Safety, subject to the receiving programme's entry requirements.
HiQual UK Level 3 Certificate in Offshore Rig Safety, for further development in offshore operational safety, hazard management, and emergency preparedness, subject to admission requirements.
Further professional training in oil and gas health and safety, process safety, fire prevention, hazardous substance management, confined space safety, working at heights, and emergency response.
Employment or career development in entry-level roles including Oil & Gas Safety Assistant, HSE Assistant, Safety Support Worker, Industrial Safety Assistant, Oilfield Operations Assistant, and Site Safety Support Assistant, subject to employer requirements and relevant workplace training.
Continuing professional development in occupational health and safety, environmental protection, industrial risk assessment, emergency planning, and oil and gas operational safety.
Frequently Asked Questions
Find answers about this qualification, assessment and certification.
To enrol on the Level 2 Award in Oil & Gas Safety, learners should normally meet the following recommended entry requirements:
Be 16 years of age or above at the time of registration.
Hold a basic secondary education qualification or equivalent. Equivalent international qualifications may also be accepted.
Learners without formal academic qualifications may be considered if they can demonstrate relevant knowledge, workplace experience, or prior learning in occupational health and safety, engineering, industrial operations, construction, maintenance, or the oil and gas sector.
Have a basic understanding or interest in workplace health and safety, industrial hazards, environmental protection, emergency procedures, and safe working practices.
Possess a sufficient standard of English language proficiency to understand safety instructions, interpret basic technical information, complete assessments, and communicate effectively in oil and gas working environments.
-
Builds foundational competence in oil and gas safety practices
-
Enhances compliance with international and national HSE standards
-
Strengthens skills in hazard identification, PPE use, and emergency response
-
Provides tools for environmental protection and sustainability in oil and gas operations
-
Offers recognized certification to support career progression in oil and gas safety roles
-
Assessment Type: Written exam + practical simulation
-
Format: MCQs, short answers, and a hands‑on safety drill
-
Total Questions: 45 theory + 1 practical simulation
-
Passing Score: 70%
-
Duration: 1.5 hours (written) + 1 day (practical)
-
Certification: Level 2 Award in Oil & Gas Safety
-
Entry‑level employees in oil and gas operations
-
Contractors and support staff working in oil and gas facilities
-
Students and early‑career professionals in energy and safety studies
-
HSE assistants preparing for advanced qualifications
-
Community workers and safety advocates in oil and gas regions
Related Qualifications
Level 2 Award in Ammonia Safety
View Level 2 Award in Ammonia Safety
Level 2 Award in Drilling Well Basics
View Level 2 Award in Drilling Well Basi...